Operating Sequence
Before the first wash, we recommend that you pour 2
3. Select the required programme
litres of water into the main wash compartment of
Turn the programme selector dial to the programme 1.
the detergent drawer in order to activate the ECO valve.
The light Ostart pause� starts to flash. The pilot lights
Then run a cotton cycle at 60!C, without any laundry in
corresponding to the various phases making up the
the machine, to remove any manufacturing residue from
programme come on.
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 4.5 KG OF WHITE COTTON AT 90!C
Suppose you have 4.5 kg of heavy soiled laundry to
wash. It is white cotton and is suitable for high
temperature washing.
1. Load the laundry
4. Select Ospin reduction� or
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,no spin� option
shaking them out as much as possible. Close the door.
Press the option button repeatedly, to select the desired
option. The relevant light illuminates.
2. Measure out the detergent
and the fabric softener5. Select the required option
Pull out the dispenser drawer until it stops. Select Oprewash� or Orinse hold� option if required, the
Measure out the amount of detergent required, pour itcorresponding light illuminates.
into the main wash compartment and into the
compartment marked if you have selected the
Oprewash� option.
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
OMAX� mark in the drawer). Close the drawer gently.
8 |
ACEC
